Cold weather’s upon us again, and you may be looking at changing or upgrading your old heating system to better deal with winter’s chill. But what type of furnace should you get? There’s actually quite a bit that will go into making that all important decision, and here are some things worth considering.

Understanding paybacks

Throughout the process of selecting a new heating system, and even when considering energy upgrades as discussed below, you’ll be faced with the concept of "paybacks." It’s an important thing to understand, especially if you’re feeling pressured by a salesperson to choose a particular product.

Cold weather’s upon us again, and you may be looking at changing or upgrading your old heating system to better deal with winter’s chill. But what type of furnace should you get? There’s actually quite a bit that will go into making that all important decision, and here are some things worth considering.

Understanding paybacks

Throughout the process of selecting a new heating system, and even when considering energy upgrades as discussed below, you’ll be faced with the concept of "paybacks." It’s an important thing to understand, especially if you’re feeling pressured by a salesperson to choose a particular product.

Let’s say you currently pay an average of $200 a month to heat your home for an average of seven months of the year, or $1,400 per year. Now let’s say that a new, high-efficiency furnace, along with some upgraded insulation, will heat your home for $90 a month, or $630 a year.

That’s a savings of $770 annually. If the new furnace and insulation cost $5,000, it would take you about 6 1/2 years for the savings to pay back the investment.

Paybacks aren’t difficult to understand, as long as you’re able to get the necessary numbers. This is something that your heating contractor and utility company should be able to help you with.

Deal with your home’s energy efficiency first

How efficient any heating system is going to be at keeping your home warm is dictated by how energy efficient the home is in the first place. You can have a small home, but if it’s drafty and poorly insulated, you’ll need a much larger furnace than might otherwise be required in order to keep it heated. That means more upfront cost and higher operating costs.

So before you consider your new heating system, if possible you should complete any required energy upgrades your home needs. Your best bet is to have an energy audit done. The auditor will make a thorough inspection of the house, and will make specific recommendations for upgrades to insulation, windows, weatherstripping, and other components that will make it more energy efficient. Your utility company or heating contractor can often arrange for or recommend energy auditors in your area.

Fuel considerations

Next, you’ll want to consider what type of fuel to use for the new heating system. Common choices include electricity, natural gas, propane and heating oil. Quite often, you’ll opt for what the house currently has, but that’s not always the best choice.

For example, you may currently have an electric furnace, but if natural gas is available in your area, you may find that to be more efficient. However, in your payback calculations you’ll need to take into consideration the cost of having the gas line brought to your house, which may or may not be covered by the gas company.

Or you may be considering replacing an oil-burning furnace with propane, but in your payback calculations remember to weigh in the costs of having the oil tank removed and the new propane tank installed. With buried propane tanks, you also have the costs of excavating to consider.

Rating furnace fuel efficiencies

All electric furnaces work on electric resistance, so 100 percent of the energy they consume goes towards heating the house; the inefficiencies with electricity would occur in the power generation process itself, and in losses that occur as the power moves through the transmission lines.

The efficiency of oil furnaces has improved quite a bit in recent years. Changes in burner designs have resulted in efficiencies going from around 60 percent to something more like 80 percent today. However, these higher efficiencies often require upgrades to the chimney if you’re planning to reuse the old one, so that’s something that needs to be taken into consideration as well.

Most of today’s natural gas and propane furnaces achieve efficiency ratings of 85 percent to 95 percent or more. So little heat is wasted with these units that they can actually be vented with plastic vent pipes. As you’d expect, with each step up in efficiency you also step up in initial cost, so that’s something to take into consideration with your payback calculations.

Heat pumps and air conditioning

To add to the mix, you’ll want to consider whether you want air conditioning. If so, be sure that the contractors are aware of that when they put their estimates together. Even if you don’t want to add it now, if you’re considering it in the future, you need to make sure the new heating system is compatible with it.

Another option worth considering is a heat pump. Heat pumps work like a refrigerator in reverse, drawing heat from the outside air and transferring it to your home. A reversing valve allows the process to work in the opposite direction as well, drawing heat from the house and exhausting it to the outside, so a heat pump gives you both heat and air conditioning.

Heat pumps generally work best in relatively moderate climates and can be very energy efficient to operate in those conditions. However, when the outside air temperatures drop too low, there’s not a lot of ambient heat to draw from, and their efficiency drops quite a bit. Heat pumps can have a significantly higher initial cost, so you need to compare paybacks carefully.

Pulling it all together

For a project this complex and potentially costly, I’d strongly recommend getting at least two estimates. Ideally, the contractors should be bidding equipment from two different, recognized manufacturers, which will give you an additional opportunity to compare costs, efficiencies and paybacks.

Be sure you verify that all licenses, bonds, insurance, and other requirements are in place and in compliance with whatever your state requires. Finally, a good heating contractor should be able to offer energy advice for your home, and should be able to give you specific payback information for the cost of any system they’re bidding.

Show Comments Hide Comments
Sign up for Inman’s Morning Headlines
What you need to know to start your day with all the latest industry developments
By submitting your email address, you agree to receive marketing emails from Inman.
Success!
Thank you for subscribing to Morning Headlines.
Back to top
×
Log in
If you created your account with Google or Facebook
Don't have an account?
Forgot your password?
No Problem

Simply enter the email address you used to create your account and click "Reset Password". You will receive additional instructions via email.

Forgot your username? If so please contact customer support at (510) 658-9252

Password Reset Confirmation

Password Reset Instructions have been sent to

Subscribe to The Weekender
Get the week's leading headlines delivered straight to your inbox.
Top headlines from around the real estate industry. Breaking news as it happens.
15 stories covering tech, special reports, video and opinion.
Unique features from hacker profiles to portal watch and video interviews.
Unique features from hacker profiles to portal watch and video interviews.
It looks like you’re already a Select Member!
To subscribe to exclusive newsletters, visit your email preferences in the account settings.
Up-to-the-minute news and interviews in your inbox, ticket discounts for Inman events and more
1-Step CheckoutPay with a credit card
By continuing, you agree to Inman’s Terms of Use and Privacy Policy.

You will be charged . Your subscription will automatically renew for on . For more details on our payment terms and how to cancel, click here.

Interested in a group subscription?
Finish setting up your subscription
×